دانلود مقاله Experimental Determination of Modulus of Elasticity of Concrete تحت word دارای 9 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است

فایل ورد دانلود مقاله Experimental Determination of Modulus of Elasticity of Concrete تحت word کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.

این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است

توجه : در صورت  مشاهده  بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی دانلود مقاله Experimental Determination of Modulus of Elasticity of Concrete تحت word ،به هیچ وجه بهم ریختگی وجود ندارد

بخشی از متن دانلود مقاله Experimental Determination of Modulus of Elasticity of Concrete تحت word :

سال انتشار: 1388

محل انتشار: نخستین کنفرانس بین المللی تکنولوژی بتن

تعداد صفحات: 9

چکیده:

The stress – strain relationship of structural concrete under compression is depicted as a 2nd degree polynomial in EN-1992-1. Compressive loads on and the displacements of a 15×30 cm cylindrical specimen, on which a standard compressometer apparatus is mounted properly, are recorded at every 2 ton load increments from the beginning to the failure and beyond. The compressive stresses and strains are computed for all the experimentally obtained points. Many 2nd degree polynomials are fitted by least-squares sequentially first to all the points from the beginning to the maximum stress resisted, and next to other points, each time dropping the highest point, down to the point corresponding to 70% of the maximum stress. Out of so many 2nd degree polynomials, the one with the greatest determination coeffificent is chosen. The slope of the line tangent to that polynomial at 40% of the maximum stress is analytically computed and reported as the tangent modulus of elasticity. The slope of the line passing through the origin and the point on that polynomial at 50% of the maximum stress is analytically computed and reported as the chord modulus of elasticity.

دانلود این فایل